MSIW93D

MSIW93D IRONWORKERS


  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated
  • 93 Ton Capacity
  • 10 H.P.
  • 14” Throat
  • 5 Work Stations
  • Simultaneous Dual Operation

Description

PUNCHING

PUNCH PRESSURE
93 tons
PUNCH WORK TABLE
Includes gauge and adjustable stops.
ADJUSTABLE SEE-THROUGH PUNCH STRIPPER
For fast and easy setup.
DIE HOLDER
Adjustable in machined T-slots for quick punch and die alignment.
STANDARD TOOLING
1-1/2″ in 3/4″
CPD SERIES
26 punch, 62 die
LARGE TOOLING
2″ in 9/16″
CPD SERIES
26 punch, 62 die
LARGE TOOLING
2″ in 9/16″
CPD SERIES
SP51P PUNCH, SP80D die.
OPTIONAL OVERSIZE TOOLING
4-5/16″ in 1/4″
THROAT DEPTH
14″
STROKE LENGTH
3-5/32″
CYCLES PER MINUTE IN 3/4″
25
PUNCHING STATION WORK HEIGHT
42-1/2″
‍ ‍

FLAT BAR SHEARING

FLAT BAR SHEAR CAPACITY
18″ in 9/16″
MAX. WIDTH X THICKNESS
14″ in 3/4″
LOWER BLADE
Four usable edges.
SUPPORT TABLE
Includes guides for accurate positioning and indicator lines at 30° and 45° left and right.
ADJUSTABLE HOLD-DOWN
Holds work piece securely in position when shearing.
UPPER SHEAR BLADE
Provides for minimum distortion. Two usable edges.
BLADE LENGTH
19″
ANGLE FLANGE TRIM
4-3/4″
FLAT BAR SHEAR WORK HEIGHT
37″

ANGLE SHEARING

MAXIMUM CAPACITY – 90°
6″ x 6″ x 9/16″
MAXIMUM CAPACITY – 45°
3″ x 3″ x 5/16″
SHEAR BLADES
Four usable edges.
ANGLE SHEAR WORK HEIGHT
47-1/4″

BAR SHEARING

ROUND BAR MAXIMUM CAPACITY
2″
SQUARE BAR MAXIMUM CAPACITY
2″ x 2″
SIX CAVITY ROUND BAR SHEAR SIZE
3/4”, 1-1/8”, 2”
SIX CAVITY SQUARE BAR SHEAR SIZE
1-1/4”, 1, 2”
CHANNEL SHEAR (OPTIONAL)
6″
I-BEAM SHEAR (OPTIONAL)
6″
BAR SHEAR WORK HEIGHT
47-1/4″

NOTCHING

RECTANGULAR NOTCHER
2″ x 4″ x 1/2″
GAUGE TABLE WITH STOPS
For precise positioning.
NOTCHER WORK HEIGHT
37″

OTHER STANDARD EQUIPMENT

FIVE SETS OF PUNCHES AND DIES
Punches: 9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″; Dies: 19/32″, 23/32″, 27/32″, 31/32″, 1-3/32″
CPD SERIES
26 punch, 62 die
MACHINE NET WEIGHT
5200 lbs
MACHINE DIMENSIONS
75″ L x 39″ W x 74″ H
SINGLE PHASE MACHINES
N/A
MAGNETIC BASE WORK LIGHT

ADJUSTABLE ELECTRIC BACK GAUGE (36″)

24 VOLT DC CONTROL VOLTAGE

SCRAP BOXES AT PUNCHING AND NOTCHING STATIONS

ADJUSTABLE STROKE DEPTH AT PUNCH

TWO FULL-CONTROL FOOT PEDALS

TWO HOLE DIE HOLDERS

TWO PIECE GAUGING TABLE AT PUNCH STATION

KEYED PUNCH HOLDER FOR SHAPED TOOLING

STANDARD VOLTAGE 230/460 VOLT, 3 PHASE, 60 HZ