
HIGH-SPEED CIRCULAR VERTICAL TILT CNC AUTO MITER The Nishijimax NHC-100M is fully automatic, handing both left and right miter cuts. Material loss is greatly reduced to 2.5 mm (0.105") kerf. CNC setup with high-speed circular sawing results in the most economical cost per cut. Set the blade RPM and chip load per tooth and the cut time is maintained by the CNC, servo motors, and ball screws.
Floor Space - 55.8 cu. ft. Machine Weight - 13,228 lbs Vertical tilt CNC miter saws any angles between 45 degrees left and right Saw head feed via precision ball screw and 10 HP AC servo motor 21 HP saw blade drive motor with infinitely variable blade RPM 32-115 The precision spindle is driven by a powerful gear reduction gearbox Precision blade guides Power-driven chip brush Powder metal brake with brake torque of 10 kgm CUTTING RANGE: 0 Degrees – Max 4 inch H x 5.551 inch W 0 Degrees – Min 3/4 inch H x 3/4 inch W 45 Degree (0-45 Left/Right) 4 inch H x 4 inch W Cutting Length 2-¾ inch to 118 inch (1-inch min in manual mode) Trim Cut Length ½ inch to 4 inch Remnant Length 2-3/4 inch Supply Bar Length 12-24 ft