New
SALVAGNINI P4LEAN-3216
Panel Benders
P4 AUTOMATIC PANEL BENDER
Welcome to factory 4.0. The P4 was invented and designed by Guido Salvagnini in 1977 and has continuously been developed. Salvagnini owns the largest factory for panel bending 4.0 worldwide.
FLEXIBLE: Universal tool for bending from 11 to 27 gage
PRODUCTIVE: Automatic set-up in masked time.
SMART: Zero scrap and consistent quality thanks to MAC 2.0
SIMPLE: Intuitive and easy programming software
REACTIVE: Extensive modularity to allow the machine to work in factories 4.0
VERSATILE: Custom solution to cut the profile or bend articulated parts
AVAILABLE: Wildest range of available models
Max Material length incoming 137.6
Max Width incoming 60"
Max Diagonal 137.8"
max bending length 126"
max bending height 6.6"
Max thickness
steel 11ga 90deg , 13 ga 130deg 14hga 135deg
Stainless 13 ga 90, 14ga 125deg, 16 ga 135deg
Aluminium 7ga 120 deg, 8 130deg, 9 135deg
Shipping Q1 2023
| Bending Length | 3,495 mm |
Maximum length of incoming sheet (in) 137.6
Maximum width of incoming sheet (in) 60
Maximum diagonal that can be rotated (in) 137.8
Maximum bending force (kN) 660
Maximum clamping force (kN) 1060
Maximum bending length (in) 126
Maximum bending height (in) 6.5
Minimum thickness (gage) 25
Maximum thickness and bending angle steel, UTS 410 N/mm2 (gage)
11 (±90°) / 13 (±130°) / 14 (±135°)
Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (gage)
13 (±90°) / 14 (±125°) / 16 (±135°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (gage)
7 (±120°) / 8 (±130°) / 9 (±135°)