The Pat Mooney PMI-18 is a semi-automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
7.5 HP Saw Motor:
The strong drive system via 7.5 HP saw motor allows for maximum cutting force and chip removal. This additional power extends the life of the saw blade between regrinds
Upcut Design and Saw Blade Chamber:
The PMI-18CD is an Upcut saw. The saw blade is housed under the work table and travels up through the work piece. This has several advantages such as safety (less blade exposed during cut), chip removal and longer blade life
Precision Ground Work Table with Special Surface Coating:
The work table is a ground surface and is coated with a special Chromate coating which prevents marring the outside of your work piece.
The pneumatic clamping system has adjustable clamping pressure to prevent distortion of thin wall profiles. The top clamp holds the work piece on both sides of the saw blade to deliver a burr free cutoff part. The clamp is controlled by its own cylinder and has adjustment according to the size of the work piece.
Saw Blade Feed:
The saw blade feed is controlled via a pneumatic cylinder with full control of the feed rate. This will allow for accurate cuts and long blade life. In addition, the saw blade travel is controlled for fastest cycle time
Additional Standard Items included with purchase of the PMI-18:
• Tool Kit
• Kanefusa 120T Saw Blade
• Operating Manual
Round-90 Degree 5.905”
Round-45 Degree 5.511”
Square-90 Degree 5.905”
Square-45 Degree 5.511”
Rec a x b-90 Degree 5.511 x 7.874”
Rec a x b-90 Degree 5.905 x 4.724”
Rec a x b-90 Degree .393 x 13.188”
Rec a x b-45 Degree 5.905 x 3.543”
Rec a x b-45 Degree 5.511 x 5.118”
Rec a x b-45 Degree .393 x 9.448”
Manufacturer Pat Mooney
Model PMI-18 UPCUT SAW
Saw Motor 7.5 HP
Straight Cut Saw 90 Degree Only
Saw Blade Speed 3200 RPM
Full Control of the Feed Rate Air over Oil Feed System
Diameter Saw Blade 18"
Maximum Sawing Height 4.33"
Maximum Sawing Width 11.81"
Table Size 26-1/3"x26"
Working Height 33-7/8" Inch
Machine Dimensions 34” x 35” x 66”
MachineWeight 770 LBS