AMADA S330-3HV HORIZONTAL MITERING SAW
Have one to sell?
ConditionNew
New
The Vision of Precision
• 3 H.P.
• 1″ Blade
• Swivel Head
• High Speed
• Horizontal
• Metal Cutting
• 60° Miter Cutting
• Hydraulic Vise
FEATURES
• Hydraulic Down Feed
- Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting. Settings are made at the operator’s control station.
• Hydraulic Auto Frame Return
- The saw frame will automatically raise hydraulically at the end of a saw cut. The saw frame can also be lifted hydraulically with the push button switch.
• Chip Brush
- Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
• Vise Jaw
- Hydraulic rack and pawl vise design clamps and holds the work piece securely. The vise is operated by a selector switch located on the operator’s control panel.
• Swivel Miter
- The saw frame swivels a full 60 degrees to the rear and 45 degrees to the front for optimum miter cutting capability. Stops are provided at -60 and +45 degrees.
Cutting Capacity:
Round (Diameter) at 90° 13″ 330 mm
Round (Diameter) at ± 45° 13″ 330 mm
Round (Diameter) at − 60° 8.7″ 220 mm
Rectangle (W x H) at 90° 18″ x 12″ 460 x 300 mm
Rectangle (W x H) at ± 45° 12″ x 12″ 305 x 305 mm
Rectangle (W x H) at − 60° 11″ x 8″ 280 x 203 mm
Work Load Capacity
Saw Blade:
Blade Size (L x T x W) 13’6″ x 0.035″ x 1″ 3885 x 0.9 x 27 mm
Blade Speed 60-330 ft/min by Inverter 18-100 m/min by Inverter
Tension Control Manual
Blade Control:
Top Limit Setting Manual Setting
Cutting Control Hydraulic Flow Control Valve
Vise Operation:
Type Single Vise
Control Adjustable Hydraulic Vises
Motors:
Saw Blade 3 HP 2.2 kW
Hydraulic Pump 1/2 HP 0.37 kW
Cutting Fluid Pump 1/8 HP 0.06 kW
Power Requirement:
Power Supply Voltage AC230V±10%, 3 PH, 60 Hz
Required at Factory Voltage Setting
Power Requirement
Cutting Fluid Tank Capacity 12 gal 45 liters
Hydraulic
Tank Capacity 4.5 gal 17 liters
Pressure Setting
Chip Disposal Manual
Angle:
Saw Frame Angle – 60° ~ 90°~ +45°
Angle Swivel Manual
Angle Display Angle Scale
Machine Dimensions (W x L x H)
Head-Up Position 79.9″ x 64.2″ x 2029 x 1631 x
Head Down Position 79.9″ x 64.2″ x 57.2″ 2029 x 1631 x 1453 mm
Table Height 30.3″ 770 mm
Machine Weight 1,543 lbs 700 kg
We use cookies to improve your experience. Privacy Policy.